socomec ATyS C55 - Maintenance; The Visualisation POP-UPS

34
EN
ATySController C55/65 - 549866C - SOCOMEC
11.9. Maintenance
Allows the user to visualise the progression and state of the maintenance alarms. If no maintenance alarms are congure this
dashboard will only show "NO MAINTENANCE ALAM CONFIGURED".
Pressing ok on "GO TO CONF" will lead to the maintenance alarm conguration menu, this will require the maintenance
password.
11.10. The visualisation POP-UPS
The controller will inform the customer about the main real-time events through a pop-up. This pop-up can have 2 types of
purpose:
- Timer running: timer pop-ups show the name of the timer active, the congured value and the countdown value with double
font. This is a dynamic pop-up that gives 2 options to the user: BACK to ignore (hide the pop-up but the timer will keep
running and can be seen in the TIMERS dashboard) or OK to bypass (skip the timer and go directly to next action; this can
also be done through the input BYPASS TIMER or with a modbus command; input and command can only work while pop-
up is displayed)- Bypassing the timer will request a validation.
- Validation / Action requested: different events can use this type of pop-up, such as fault clearing, conrmation to run a
test, conrmation to change parameters, validation to bypass a timer,… Usually these type of pop-ups can be ignored by
pressing the BACK button and some of them offer different options to the user.
While it is not recommended to do so, it is possible to disable timer or alarm or both pop-ups. To change the conguration go
to "MAIN MENU" > "PARAMETTERS" > "DISPLAY" > "OPTIONS" > "POPUP DISPLAYED".
Note: if timer pop-ups are deactivated the function to bypass current active timer with inputs or communication will
not be functional. (bypass timers through the TIMER dashboard will still be functionnal).