socomec ATyS C55 User Manual

7
EN
ATySController C55/65 - 549866C - SOCOMEC
2. INTRODUCTION
ATYS C55 and C65 ATS controllers are compliant to international product standards and are designed specically for use in
low voltage power applications to ensure the safe transfer of a load supply between a normal and an alternate source.
Besides product standards the C55 and C65 are designed to meet IEC 60364 and IEC 61439 installation standard
requirements (C55/65) as well as NFPA 110 and NFPA 70 (NEC) when using the specic UL reference (C66).
This version of instruction sheet is based on C55 and C65 products with rmware version 2.X
ATyS C55/65 range of automatic transfer switch (ATS) controllers ensure:
• Safe controls for transfer between a normal and alternate source
• A manufacturer assembled and tested solution
• Intuitive and simple controls for local operation
• Quick easy and safe electrical manual operation
• Straightforward installation with effective ergonomics
• A simple and secure control interface
• Easy mounting and smart conguration
• Suitable for indoor and outdoor applications (IP65) with gasket.
Glossary:
ATS: Automatic Transfer Switch
ACB: Air Circuit Breaker
MCCB: Molded Case Circuit Breaker
FT: Fast Transfer
DT: Delayed Transition
SCPD: Short Circuit Protection Device
CT: Current Transformer
VT: Voltage Transformer
GND: Ground
I/O: Inputs/Outputs
RTC: Real Time Clock
ECS: Easy Cong System
S1: Source 1
S2: Source 2

socomec ATyS C55 Specifications

General

Brand	socomec
Model	ATyS C55
Category	Controller
Language	English