socomec ATyS C55 - I;O Module Connections

62
EN
ATySController C55/65 - 549866C - SOCOMEC
IO-10C65 IO-10
IO-10C65C-31 I-30
IO-10C65C-31RS485M-70 I-30
IO-10C65
D-70
I-30
Using Diris D70 gateway.
Note: when the controller is part of a Digiware chain, it’s not possible to use the external I/O modules in direct
connection with the controller.
14.1.6.5. I/O module connections
Digital Inputs / Outputs Digiware Bus
13
14
23
24
12-48VDC
12-24V
AC
50mA
12VDC
IN1
COM-
IN2
IN3
IN4
OUT1
OUT2
OUTPUT
INPUT
DIGIWARE BUS
RJ45
Total power consumption per module is 0,5W and each 50mts (164 feet) of RJ45 cable 1,5W extra should be considered for
the design of the installation.
For more technical details on the Digital I/O modules consult the I/O module Quickstart.
I/O module connection cables:
RJ 45 Digiware bus cables available can be ordered according to their length:
LONGUEUR (M) QUANTITÉ RÉFÉRENCE
0.1 1
4829 0181
0.2 1
4829 0188
0.5 1
4829 0182
1 1
4829 0183
2 1
4829 0184
5 1
4829 0186
10 1
4829 0187
50 m reel + 100 connectors
4829 0185
Note: these cables are specic RJ45 cable for use with the DIGIWARE bus, do not use standard RJ45 cables.
The maximum length of the Digiware bus is 100 meters (328 feet).