socomec ATyS C55 - Mimic and Status Screens

31
EN
ATySController C55/65 - 549866C - SOCOMEC
11.2. Mimic
This screen gives the user information on the availability of the sources, the position of the switch. The user can cycle 3 sub-
menus using the navigation arrows:
MET.: gives the user information on the voltage, current and frequency of the sources.
STAT.: gives the user information on the sources and loads.
INFO.: gives information on the time running of each source.
On the Summary display a mimic shows the status of the switch and the supply to the load. The sources will appear crossed
if they are not available and not crossed if they are on. This information is also detailed in the status screen 2.1.
11.3. Status
Give more detailed information on the sources
STAT: informs the user on the availability of each source.
SYNC: Information on the voltage, frequency and phase angle of both sources.