socomec ATyS C55 - INSTALLATION; Product dimensions and Door mounting

16
EN
ATySController C55/65 - 549866C - SOCOMEC
8. INSTALLATION
8.1. Product dimensions (in/mm)
6.30
160
8.66
220
9.45
240
2.52
63,90
1.89
48,10
7.09
180
8.2. Mounting
The ATyS C55/65 can be mounted either on the door or on the backplate of an enclosure (both mounting kits are delivered
with the product).
8.2.1. Door mounting
The ATyS C55/C65 can be mounted on doors up to with a thickness 4mm (0.15in).
STEP 1: Cut out for the controller
Cut a rectangle hole of 220x160mm / 8.66 x 6.3in on the enclosure door as shown below.
8.66
+/-0.4
220
+/-1
6.30
+/-0.4
160
+/-1
CAUTION ! For IP65 protection, the gasket must be placed and tted around the inside
edge of the controller as shown above.