83
EN
ATySController C55/65 - 549866C - SOCOMEC
16.1.2. Connection diagram with Circuit Breakers
16.1.2.1. With mechanical interlock
Check that the DPS is adapted to
the RTSE current and the network
voltage requirements.
- Please consider Inputs and Outputs cabling are related to the conguration parameters. This diagram corresponds to the
ATS controller presets for the Circuit Breaker technology. The presets for each type on technology can be found in chapter
"9.6.1. Command circuits", page 25.
CAUTION ! Due to the numerous types of RTSE type CB (circuit breakers) available on the market,
compatibility and specic wiring designs must be carried out and qualied by others.