socomec NET-VISION - Appendix: Configuring Net Vision via SSH; Configuration Utility Menu

78
GB
NET-VISION 7 - SOCOMEC
appendix: Configuring net vision via ssh
SSH must be enabled in the NET VISION Control page.
Using SSH tool to open a terminal session:
login as: admin
admin@192.168.1.1’s password:
Date 03/05/2017
Time 16:41:53
+================================================================+
| Conguration Utility |
| [Socomec Net Vision 7 V1.00] |
+================================================================+
1. SNMP/WEB Card Settings
2. Reset Accounts/Passwords to Default
3. Reset Conguration to Default
4. Restart SNMP/WEB Card
0. Exit
Please Enter Your Choice =>