Sonicware SmplTrek - Clock Sync - Clock Settings


161

SOURCE

Use the built in clock. The SmplTrek
will operate as the master when
used by itself or synchronizing other
devices.

The SmplTrek will synchronize with
MIDI clock received through the MIDI
IN.

The SmplTrek will synchronize with
clock signals received through the
SYNC IN.
TEMPO LED
The LED will light along with the syn-
chronized tempo.
POLARITY IN
This switches the polarity of the
SYNC IN jack between  (+ /
waveform rising) and  ( − /
waveform falling). Set this to match
the sync polarity of the connected
device.
POLARITY OUT
This switches the polarity of the
SYNC OUT jack between  (+
/ waveform rising) and  ( − /
waveform falling). Set this to match
the sync polarity of the connected
device.