Sony BVM-D32E1WA - Control Preset Adj; Input Configuration

1-42
BVM-D32E1WA/D32E1WE/D32E1WU
Sony Corporation ©1999
Printed in Japan
BVM-D20F1J/D20F1U/D20F1E/D20F1A/D24E1WJ/D24E1WU/D24E1WE/D24E1WA/D32E1WJ/D32E1WU/D32E1WE/D32E1WA
4-072-655-03 (1)
INPUT CONFIGURATION (1/2)
@ INPUT CONFIGURATION (2/2)
xxCH
FORMAT
SLOT NO
INPUT NO
YC SEP
SYNC MODE
SCREEN MODE
SAFE AREA DISPLAY
SAFE AREA MODE
APERTURE
APERTURE VALUE
xxCH
FILTER
CHANNEL NAME
CONTROL
COLOR TEMP
H PHASE
1125/60
I SYSTEM
COPY FROM
COMPOSITE
YC
COMPONENT
SDI
TRAP/BPF
2 LINES COMB
3 LINES COMB
INT
EXT
16:9-NORM
16:9-UNDR
4:3-NORM
4:3-UNDR
SIZE
H SIZE
V SIZE
H POSITION
SHAPE
4:3 AREA MARKER
4:3 BLANKING
NTSC
PAL
PAL-M
SECAM
AUTO
YPBPR
SMPTE/
EBU-N10
YPBPR
BETACAM
RGB
NTSC
PAL
4:2:2
AUTO
HD SDI
PROG
EDIT
CAM
VTR
NEW NAME
PRESET
CH SET
STD
COL1
COL2
CH SET
1080
I
1035 I
OTHER CH
OTHER MONITOR
MEMORY CARD
MONITOR
ADDRESS
FILE NAME
CH NO
SET UP
INPUT CONFIGURATION
REMOTE
PASSWORD
SYSTEM CONFIGURATION
ON SCREEN SET
ALIGNMENT
WHITE UNIFORMITY
EXTEND MENU
ROTATION (1/3)
H PIN (2/3)
VSTATIC CONV (3/3)
LANDING ADJUST (1/2)
DIGITAL UNIFORMITY ADJ (2/2)
CONV FINE ADJUST...
D
E
F
MENU
Menu Operation
• To confirm your selection/setting c Press ENTER or Ent.
• To abort menu operation c Press MENU.
• To move the cursor c
Press UP/DOWN or turn PHASE.
Options in blue: Disabled
PRESET: Sets common data for all channnels.
CH SET: Sets data for each individual channel.
F1 button: Turns on/off characters on the screen in
MANUAL adjustment mode.
PRESET
CH SET
MATRIX
MANUAL
AUTO
COPY FROM
PHASE
CHROMA
BRIGHT
CONTRAST
FULL FIELD WHITE 100%
8 COLOR BAR 100%
8 COLOR BAR 75%
7 COLOR BAR 100%
SMPTE COLOR BAR
EIA COLOR BAR
OTHER VALUE
OTHER MONITOR
MONITOR ADDRESS
MEMORY CARD
FILE NAME
PRESET
CH SET
STD
COL1
COL2
CH SET
MANUAL
PROBE
COPY FROM
TRIM
STD
COL1
COL2
CH SET
D65
D93
OTHER VALUE
B
COLOR TEMP ADJ
Color Temperature Adjustment
A
CONTROL PRESET ADJ
Contrast/brightness/chroma/phase adjustments
D
INPUT CONFIGURATION
Settings pertaining to the input signal


CONTROL PRESET ADJ...
MENU      
COLOR TEMP ADJ...
SETUP...
MEMORY CARD...
C O P Y ... 
STATUS...
FROM

KEY PROTECT  OFF

p
A
B
C
MATRIX for YP B P R signals
PRESET: Default setting is automatically
selected.
CH SET: Selects MATRIX for each
individual signal format to be applied
on all channels (ITU 709, ITU 601 or
SMPTE 240M)
STD, COL 1, COL 2: Sets common data
for all channnels.
CH SET: Sets data for each individual
channel.
C
SET UP
Set up menus for input channel, on screen display, decoders, etc.
Geometry and convergence adjustments
Beam landing and CRT uniformity
adjustments
2)
(See reverse for graphic descriptions of geometry and
convergence adjustments.)
Menu List
Press the MENU button.
• When the short-cut for while balance menu is assigned (see E SYSTEM CONFIGURATION), press the F2 button to display the
MANUAL menu.
Quick Reference
1)
1) BVM-D32E1W series only
2) BVM-D24E1W/D32E1W series only