Sony DCR-PC350 - Adjusting Items When Replacing Main Parts and Boards

6-2
DCR-PC350/PC350E
Replaced parts
Block replacement Parts replacement
z
z
z
zz z
zz
zz z
z
zz z
zz z
zz z
zz z
zz z
z
z
z
z
zz
zzz
zz
zz
zz z
zz z
zzz
z
zz
zzz
zzz zz
zz
zz
Lens device
Mechanism deck (Note1)
LCD block LCD901 (LCD panel, touch panel)
LCD block LED901 (Backlight)
EVF block LCD902 (LCD panel)
Flash unit (FL7450)
Mechanism deck M901 (Drum assy) (Note1)
Mechanism MD block
CD-537 board IC7302 (CCD imager)
CD-537 board IC7303, X7301 (Timing generator)
CD-537 board IC7305 (S/H)
PD-225 board IC602 (RGB driver, Timing generator (LCD))
SE-151 board D2501 (Backlight (EVF))
SE-151 board SE2500/2501 (YAW/PITCH sensor)
VC-370 board IC1501 (,A/D conv.)
VC-370 board IC2101 (Camera DV signal process, etc.)
VC-370 board IC2301 (DV signal process,RF signal process)
VC-370 board IC1801 (REC/PB AMP)
VC-370 board IC1901 (Video IN/OUT)
VC-370 board IC1650 (RGB driver, Timing generator (EVF))
1-1. Adjusting items when replacing main parts and boards.
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note1: When replacing the drum assy. or the mechanism deck, reset the data of page: 7, address: A7 to A9 to “00”. (Refer to “Record of Use check” of
“6-4. SERVICE MODE”)
Table. 6-1-1(1).
Adjustment
Section
Initialization of
8, A, B, C, D, E, F,
14, 18, 19, 1A, 1B, 1C,
1E, 1F page data
Camera
Color EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Loading of flash memory program
Initialization of A, B, D, 1A,1B page data
Initialization of 8, C, 18, 1C page data
Initialization of E, F, 14, 19, 1E, 1F page data
54MHz/67.5MHz origin oscillation adjustment
HALL adj.
MR adj.
CCD Output 2ch Matching adj.
Flange back adj.
Mixed color compensation adj.
ND ON/OFF adj.
AWB standard data input
LV standard data input
Auto white balance adj.
Color reproduction adj.
MAX GAIN adj.
Mechanical shutter adj.
Steady shot check
Strobe light level adj.
Strobe white balance adj.
EVF automatic adj.
White balance adj.
LCD automatic adj.
V COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Tape path adj.
Touch panel adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
Error rate check
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.