107
English
•
Place the display unit more than 0.5 m/20" away from a
high voltage source, large current source, large power relay,
and similar device.
•
For installation of the display unit, avoid the location
exposed to chips, cutting oil, or machine oil. If unavoidable,
take adequate countermeasures.
•
Do not put on a vinyl cover directly over the display unit or
put it in a closed container.
•
The ambient temperature should be in the range of 0°C to
40°C (32°F to 104°F).
•
Avoid exposure to direct sunlight, hot blast, or heated air.
Switchboard (Keep min. 0.5 m/20" away.)
Welder
Chips
Cutting oil
Machine oil
POWER
LY51
RESET
REF
F
MODE
REF
PEAK
ENTER
PRINT
To Next Page
Loading...
