181
English
7-4. Print Key Operations
When the LZ51-C (option) is connected, this outputs data to the RS-232C. See the LZ51-C instruction manual for the output
data.
These operations are the same when the external universal input is set to external print.
When the LZ51-C is not connected, print key operations are invalid.
7-5. Mode Switching
You can switch the display by pressing the
MODE
key.
When the main display is set to the peak value (maximum, minimum and peak-to-peak values) by the initial settings, pressing
the
MODE
key lets you view the current value. The current value is the axes selected by the initial setting item “4-6-4. Input axis
and addition/subtraction axis settings”.
1. Press
MODE
while the PEAK LED is lighted.
The PEAK LED turns off and the main display shows the
current value.
2. Press
MODE
while the PEAK LED is off.
The PEAK LED turns on and the main display shows the
peak value.
When the main display is set to the current value by the initial settings, the display does not change.
The PEAK LED turns off.
The PEAK LED turns on.
To Next Page
Loading...
