167
English
Deutsch
6-6.
MODE
ENTER
(Mode/Enter Key)
Display Operation performed Operating procedure Related sections
During initial setting mode
During measurement mode
During function setting
mode
When an error message
is displayed (“Error” and
“r.Error”)
6-7. External Universal Input
When you connect a switch or an electronic switch (IC) to the external universal input pin, it operates as the input set by the
initial settings.
Display Operation performed Operating procedure Related sections
During initial setting mode
During measurement mode
(during normal
measurement and zero
point reference mode
measurement)
When an error message
is displayed (“Error”
and “r.Error”)
Selects and enters the item to be set with the initial
settings.
Switches the main display between the current value
and the peak value when the main display is set to
display the peak value by the initial settings.
Enters the various setting items.
Ignored
Page 123: 4-6.
Initial Settings
Page 181: 7-5.
Mode Switching
Page 176: 7-3.
Function Key
Operations
Ignored
Operates as the function set by the initial settings.
Ignored
Page 182: 7-6.
External Contact
Point Input
Operations
Peak hold
→Page 162: 5-1.
Peak Hold Function
To Next Page
Loading...
