Sony LY51 - Current Value Store Enable;Disable

158
English
4-6-12. Current value store enable/disable
The unit can be set to store or not store the current value when the power is turned off.
(Continued from 4-6-1 (2).) (P.133)
1. Select “STr” and press
ENTER
.
Selects whether or not to store the current value when the
power is turned off.
The selected item flashes.
The initial setting is not stored (NonSTr).
2. Select the desired item with the cursor movement keys
.
• To enter the settings
3. Select the required item and press
ENTER
.
Enters the current value store setting.
(In this case, store (STr) is selected.)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
3. Select “End” and press
ENTER
or press
RESET
.
Interrupts the current value store settings.
(Previous setting contents remain.)
↓ (After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
(Lights)