136
English
• To enter the set code
2. Press
ENTER
while code input table (2) is displayed.
Enters the setting contents. (Flashing → Lighted
steadily)
The setting contents light steadily for approximately
2 seconds for confirmation.
When linear compensation is enabled, the settings do
not end and operation shifts to the linear
compensation value input. The input method is the
same as “4-6-8. Linear compensation setting”
(P.151).
• To interrupt the settings
2. Press
RESET
.
Interrupts the collective automatic settings.
(Previous setting contents remain.)
(Lights)
↓
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
To Next Page
Loading...
