140
English
• To enter the settings
3. After selecting the desired item, press
ENTER
.
Enters the power-on display mode.
(In this case, initial setting mode (INIT) is selected.)
The setting contents light steadily for
approximately 2 seconds for confirmation.
• To interrupt the settings
3. Press
RESET
or select “End” and press
ENTER
.
Interrupts the power-on display mode settings.
(Previous setting contents remain.)
(Lights)
↓
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
To Next Page
Loading...
