4
Warning!
•
Do not use the display unit with voltages other
than the indicated power voltage, and do not
connect multiple plugs to a single outlet as this
may result in fire or electric shock.
•
Do not damage, modify, excessively bend, pull
on, place heavy objects on or heat the power
cord, as this may damage the power cord and
result in fire or electric shock.
•
Do not handle the power plug with wet hands
as this may result in electric shock.
•
The power cord contains a safety ground. Make
sure to connect this ground. Failure to do so may
result in electric shock or fire.
(See “4-1. Connection of Cables” on page 113.)
•
Do not open the cover of the display unit to
disassemble or modify the unit or to replace the
fuses, as this may result in burns or injury. These
actions may also damage the internal circuitry.
Caution!
•
When unplugging the power plug, do not pull on
the power cord as this may damage the cord
and result in fire or electrical shock. Be sure to
grip the power plug when unplugging it from the
socket.
•
The unit does not have an explosion-proof
structure. Therefore, do not use the unit in an
atmosphere charged with inflammable gases as
this may result in fire.
•
When the unit will not be used for an extended
period of time, be sure to unplug the power plug
from the socket for safety.
•
Be sure to turn off the power before connecting
or disconnecting power and signal connectors
in order to prevent damage or misoperation.
•
The unit does not have an earthquake-proof
structure. Therefore, do not use the unit in
moving areas or areas exposed to strong
shocks.
•
Do not block the ventilation holes on the sides
and bottom of the unit. (Position the unit 10 cm
or more away from walls.) Also, take care not to
allow dirt or foreign objects enter the inside of
the unit. In particular, metal chips entering the
unit may cause shorts and damage the internal
circuits.
To Next Page
Loading...
