156
English
• To enter the settings
5. Select the required signal and press
ENTER
.
Enters the universal output 1 setting.
(In this case, alarm (ALM) is selected.)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
5. Select “End” and press
ENTER
or press
RESET
.
Interrupts the universal output signal settings.
(Previous setting contents remain.)
(2) End settings (Continued from P.155.)
3. Select “End” and press
ENTER
or press
RESET
.
Ends the universal output signal settings.
(Lights)
↓
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
To Next Page
Loading...
