Sony PMW-EX280 - Page 35

Procedure
1. Remove the six tapping screws (2 x 5) to detach the SW bracket A and SW bracket B.
Tapping screws
(2 x 5)
Tapping screws
(2 x 5)
SW bracket A
SW bracket B
Note
Position the SW bracket A at three points and the SW bracket B at two points when installing them.
Positioning locations Positioning locations
SW bracket B
SW bracket
A
2. Remove the SW conductivity sheet from the SW bracket A.
SW conductivity sheet
SW bracket A
PMW-200/PMW-EX280
2-5