Sony PMW-EX280 - Page 53

8. Disconnect the DCP-56 board from the connector CN201 on the AU-342 board.
HN-387 board
HN-384 board
Harness
Main heat spreader DCP
Precision screws
(M2 x 4)
Precision screws
(M2 x 4)
Precision screws
(M2 x 4)
Radiation sheet position
DCP-56 board
CN2300
CN2402
CN2301
CN201
(AU-342 board)
CN005
CN001
CN003
DCP-56 board
Fine-wire coaxial
cable (R)
Fine-wire coaxial cable
(G)
Fine-wire coaxial
cable (B)
Note
If the radiation sheet has peeled off, attach a new one referring to the figure.
9. Remove the four tapes, cushion main C, and cushion main A.
Cushion main C
Cushion main A
Tapes
DCP-56 board
10. Install the removed parts by reversing steps of removal.
PMW-200/PMW-EX280
2-23