Sony XVS-G1

143
4 In the [Filter Mode] group, select an anti-aliasing
mode.
Mode1: Even when t
he picture is reduced, add
compensation so that it can be seen clearly
(standard).
Mode2: Su
ppress aliasing when enlarging or
reducing the picture (soft).
Mode3: Do
not suppress aliasing when enlarging or
reducing the picture (sharp).
Setting Resizer Effects
Setting a wide key border
1 Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2 Set the [Resizer] button to the on state.
3 Set the [Dual Rszr Effect] button to the on state.
4 Set the [Wide Key Border] button to the on state and
set the following parameters.
a) Common to the [Soft] drop shadow parameter.
5 Set the [Border Color] button to the on state and set
the following parameters.
To add an outline to a wide key border
Set the [Outline] button to the on state.
Setting a drop shadow
1 Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2 Set the [Resizer] button to the on state.
3 Set the [Dual Rszr Effect] button to the on state.
4 Set the [Drop Shadow] button to the on state and set
the following parameters.
a) Common to the [Soft] wide key border parameter.
Setting edge enhance
1 Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2 Set the [Resizer] button to the on state.
3 Set the [Edge Enhance] button to the on state and set
the following parameters.
Setting a mosaic
1 Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2 Set the [Resizer] button to the on state.
3 Set the [Mosaic] button to the on state and set the
following parameters.
No. Parameter Adjustment
1 H Simultaneous adjustment of
b
order width of left and right
edges
2 V Simultaneous adjustment of
b
order width of top and
bottom edges
3 All Simultaneous adjustment of
b
order width of top, bottom,
left, and right edges
4 Soft Softness of border
a)
5 Density Density of border
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
No. Parameter Adjustment
1 H Shadow position in the
ho
rizontal direction
2 V Shadow position in the
vertical dir
ection
3 Size Shadow size
4 Soft Softness of shadow
a)
5 Density Density of shadow
No. Parameter Adjustment
1 H Gain in horizontal direction
2 V Gain in vertical direction
3 All Simultaneous adjustment of
ga
in in horizontal direction
and vertical direction
No. Parameter Adjustment
1 Size Tile size