Sony XVS-G1

156
2 Set the [Aspect] button to the on state and set the
following parameter.
Replicating a wipe pattern (Multi)
You can replicate a pattern horizontally, vertically, or
both up to 63 times.
You can also change the orientation of alternate patterns
o
r change the position.
1 Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
2 Set the [Multi] button to the on state and set the
following parameters.
To adjust replicated patterns
In the [Multi Adjust] group in the Home > M/E-1 > Bus/
Tran
sition > Wipe > Main Modify menu (11109.35),
select a pattern adjustment method.
H Invert: Inv
ert the horizontal orientation of patterns
alternately.
V Invert: Invert
the vertical orientation of patterns
alternately.
Non-Mask: E
nsure a pattern is always visible on the
screen, even when the position function is used to
move the pattern position.
Position: Move a
pattern within the pattern area divisions
set by repetition (Multi).
When the [Position] button is se
lected, set the following
parameters.
Making a wipe pattern like a window blind
(Pairing)
You can use a pattern to create a window blind effect with
slats in the horizontal or vertical direction.
1 Open the Home > M/E-1 > Bus/Transition > Wipe >
Main Modify menu (11109.35).
2 Set the [Pairing] button to the on state and set the
following parameters.
No. Parameter Adjustment
1 Aspect Aspect ratio
• Negative values expand
vertically.
• Positive values expand
ho
rizontally.
No. Parameter Adjustment
1 H Multi Number of repetitions of
p
attern horizontally
2 V Multi Number of repetitions of
pa
ttern vertically
3 Shift Pattern layout
• Negative values move
even
-numbered columns to
the left.
• Positive values move even-
nu
mbered columns to the
right.
Multi disabled Multi enabled
No. Parameter Adjustment
1 Position H Horizontal position
• Negative values move right.
• Positive values move left.
2 Position V Vertical position
• Negative values move down.
• Positive values move up.
No. Parameter Adjustment
1 Width Width
2 H Offset Spacing in the horizontal
dir
ection
• Negative values move the
even-numbered group to
the left, and the odd-
numbered group move to
the right.
• Positive values move the
even-n
umbered group to
the right, and the odd-
numbered group move to
the left.
3 V Offset Spacing in the vertical
dir
ection
• Negative values move the
even-n
umbered group up,
and the odd-numbered
group down.
• Positive values move the
even-n
umbered group
down, and the odd-
numbered group up.
Pairing enabledPairing disabled