Sony XVS-G1

259
For details about settings, see “Inserting the first
keyframe automatically when an empty
register is
recalled” (page 415).
• You can configure a setting such that when anot
her
effect timeline register is recalled while editing an
effect timeline, the edited effect timeline is saved
automatically (auto save function).
For details about settings, see “Saving an effect
timeline automatically” (page 415).
• You can configure a setting such
that effect timeline
edit mode ends when a register is recalled when the
utility/shotbox control block is in effect timeline edit
mode.
For details about settings, see “Exiting edit mode
automatically when a register
is recalled during
editing” (page 416).
1 Press the [EFF] button.
The [EFF] button and [RCALL] button turn on
a
mber, and the numeric keypad control block
switches to effect timeline operation mode.
2 Select the target region to set using the region
selection buttons.
You can select multiple regions.
For details about selecting a region, see “Selecting a
region” (page 257).
To select all regions configured beforehand
Press the [ALL] button.
For details about setting the regions selected
si
multaneously, see “Setting Regions Selected
Simultaneously” (page 397).
3 Enter a register number in the numeric keypad area.
For details about selecting a register, see “Selecting
a register” (page 258).
To add a temporary attribute
Press the [EFF DISS] button, turning it on green.
4 Press the [ENTER] button.
The specified register is recalled.
To undo a register recall
To undo a recall immediately after recalling a register,
press
the [UNDO] button.
Saving an Effect Timeline
An effect timeline register can be saved by switching the
numeric keypad control block to effect timeline operation
mode.
1 Press the [EFF] button.
The [EFF] button and [RCALL] button turn on
ambe
r, and the numeric keypad control block
switches to effect timeline operation mode.
2 Select the target region to set using the region
selection buttons.
You can select multiple regions.
For details about selecting a region, see “Selecting a
region” (page 257).
To select all regions configured beforehand
Press the [ALL] button.
For details about setting t
he regions selected
simultaneously, see “Setting Regions Selected
Simultaneously” (page 397).
3 Press the [STORE] button, turning it on amber.
4 Enter a register number in the numeric keypad area.
The currently recalled register number is
displayed
on the display on the right side. To select another
register, enter a register number.
For details about selecting a register, see “Selecting
a register” (page 258).
5 Press the [ENTER] button.
The effect timeline is saved in the specified register.
The [RCALL] button and [STORE STATS] button
turn on am
ber.
To undo saving of an effect timeline
While the [STORE STATS] button is lit amber, press and
ho
ld the [STORE STATS] button and press the [UNDO]
button.
Creating and Editing an Effect
Timeline
You can create and edit an effect timeline by recalling an
effect timeline register.
After creating and editing an effe
ct timeline, save it in an
effect timeline register.