Sony XVS-G1

266
Effect timeline creation/edit flow
Editing a keyframe
The operations during editing and the duration after
editing may vary depending on the effect timeline
duration mode.
For details, see “Duration and Delay” (page 254).
1 Display the [Effect Timeline Edit] taskbar.
The effect timeline switche
s to edit mode.
2 Press the [All Edit Options] button.
The [Edit Timeline] window appears.
The buttons used for editing
are shown on the left,
and the numeric keypad area is shown on the right.
3 Edit using the buttons and numeric keypad area.
Selecting an edit point
Move to the target position for editing (edit point) on the
effect timeline.
To move to the previous keyframe
Press the [Previous KF] button.
You can perform the same operation using the [Previous
KF
] button in the [Effect Timeline Edit] taskbar.
To move to the next keyframe
Press the [Next KF] button.
You can perform the same operation using the [Next KF]
butt
on in the [Effect Timeline Edit] taskbar.
To move to a specified timecode
Press the [Go to TC] button, enter a timecode in the
numeric
keypad area, and press [Enter].
• You can also enter a difference value from the currently
se
t value.
For details, see “Entering a difference from a current
value” (page 77).
• If multiple keyframes are po
sitioned at the same
timecode, the keyframe with the lowest number is
selected.
To move to a specified keyframe number
Press the [Go to KF] button, enter a keyframe
number in
the numeric keypad area, and press [Enter].
You can also enter a difference
value from the currently
set value.
For details, see “Entering a difference from a current
value” (page 77).
Inserting a keyframe
1 Select an edit point.
2 Create the keyframe to insert.
3 Press the [Insert Before] button or [Insert After]
button.
The keyframe is inserted before or after the selected
po
sition.
You can perform the same operation using the [Insert
Afte
r] button in the [Effect Timeline Edit] taskbar.
Modifying a keyframe
1 Select an edit point (keyframe).
Select a region (see page 264).
Select the target region to set.
r
Recall an effect timeline register (see page 264).
When creating, recall an empty register. When editing,
recall the target register to edit.
r
Select an edit point (see page 266).
Select a position on the effect timeline at which to insert a
keyframe, or select a
keyframe to modify or delete.
r
Edit a keyframe (see page 266).
Insert, modify, or delete a keyframe.
r
Set a time (see page 268).
Set the execution time of the effect timeline.
r
Set a path (see page 270).
Set the interpolation processing used between keyframes.
r
Save the effect timeline (see page 265).
Save the created/edited effect timeline in an effect timeline
re
gister.
Note
Note
Note
Notes
Note
Note