Sony XVS-G1

311
4 Press the [MOD] button.
The selected event is modified.
You can also select and modify all events.
For details, see “Selecting all events” (page 311).
Deleting an event
1 Select an edit point.
2 Press the [DEL] button.
The selected event is deleted.
You can also select and delete all events.
For details, see “Selecting all events” (page 311).
Selecting all events
To select all events registered in a macro as edit targets,
press the [ALL] button, turning it on orange.
This operation is available when
modifying or deleting an
event.
Merging registers
You can insert all events from another register at a
specified position.
1 Select an edit point.
2 Enable auto insert mode.
Registers cannot be merged when
auto insert mode is
disabled.
3 Recall a register to merge.
Recall a macro register using one of the following
bu
ttons.
• Buttons with a set macro attachment (see page 328)
• Cross-point buttons in the cr
oss-point control block
(see page 322)
• Buttons in cross-point pad in
the cross-point control
block/AUX bus control block (see page 322)
• Memory recall buttons in the utility/shotbox
co
ntrol block (see page 322)
• Memory recall buttons in the utility control block
(see page 322)
• Buttons in the numeric keypad area i
n the numeric
keypad control block (see page 322)
All events in the recalled register are inserted after the
se
lected event.
Note
Note
Note