Sony XVS-G1

343
7 Press the [Save] button.
8 Check the message, then press [OK].
The files are saved in the se
lected package.
To display the register view/edit menu
A list of registers is displayed in th
e [Switcher] group.
Press the [Browse Multi Region] button to recall the
regi
ster view/edit menu for each category.
For the effect timeline category, the Home > Register >
Eff
ect Timeline > Edit Register > Browse Multi Rgn
menu (18301.31) is recalled.
For the key snapshot, wipe snapshot, DME wipe
sn
apshot, shotbox, and macro categories, press the
[Browse] button. For the macro attachment category,
press the [Attachment] button.
To display the file view/edit menu
The list of files included in the selected package is
di
splayed in the [Package] group.
Press the [Browse Files] button to recall the file view/edit
menu for
each category.
For the effect timeline category, the Home > File >
Regist
er > Effect Timeline > Browse Files menu
(10104.14) is recalled.
Copying a File
You can copy category files between packages.
Files cannot be copied t
o a locked package.
1 Open the Home > File > Register > Effect Timeline >
Copy menu (10104.13).
2 Select a region.
The regions that can be selected vary depending on
t
he category.
For details, see “To select a region” (page 342).
Selection of a region is not required in the shotbox,
ma
cro, and macro attachment categories.
3 Press the [Select] button in the [Source Package]
group.
The [Select Package] wind
ow appears.
4 Select a copy source package and press [OK].
To select the default package
Press the [Default Package] button.
5 In the [Source Package] group list, select the target
file to copy.
To select and copy multiple files, place a check mark
besi
de the target files to copy.
To select and copy all files, place a check mark in the
Se
lect All checkbox.
You can also press the [Sel
ect File(s)] button and
enter a file number in the numeric keypad window.
Selection of a file is not
required in the macro
attachment category as there is only one file.
6 Press the [Select] button in the [Target Package]
group.
The [Select Package] window appears.
7 Select a copy destination package and press [OK].
To create a new package
Press the [New Package] button to display the [New
P
ackage] window.
Specify a package name, tags,
and memo in the same
way as in [Edit Properties] window.
For details, see “Editing Package Properties”
(page 334).
To select the default package
Press the [Default Package] button.
8 In the [Target Package] group list, select a copy
destination file.
When multiple files are selec
ted, select the first copy
destination file.
You can also press the [Select
Destination] button
and enter a file number in the numeric keypad
window.
The copy destination of the first file
selected in the
[Source Package] group is the first file selected in the
[Target Package] group, and the subsequent files in
the [Target Package] group in the same relative
positions as the selected files in the [Source Package]
group become copy destinations. The first file in the
[Target Package] group is shown in light blue, and the
subsequent copy destination files are shown in blue
gray.
Selection of a file is not
required in the macro
attachment category.
Note
Note
Note
Note
Note