Sony XVS-G1

38
c Operation buttons
d Numer
ic keypad
Use to enter numeric values and to
add an effect timeline/
snapshot attribute. Entered numeric values appear on the
display.
It is also used to enter numeric values in conjunction with
sett
ing parameters in the device control block, setting the
transition rate in the utility/shotbox control block, and
other tasks.
The [GPI ENBL] button function is not supported.
e Di
splay
The following information is displayed.
• Left-side display (lines 1 to 3) and right-side display
(li
nes 1 to 2):
Selected region names (referen
ce region is highlighted)
• Right-side display (lines 3 to 4):
Register numbers, referen
ce region name, numeric
values entered in the numeric keypad, and other items
User:
User 1 to User 8
USER1 to
USER8
User regions
– ALL Select all regions
configured
beforehand
If you press the
[ALL] butt
on while
a region is
selected, all
regions are
deselected.
Button name Description
UNDO After recalling a register, returns to
the
state before the register was
recalled.
STORE STATS Lights up amber when an effect
time
line/snapshot/shotbox/macro
is saved in a register.
While the [STORE STATS] button
is
lit amber, you can press and
hold the [STORE STATS] button
and press the [UNDO] button to
return to the state before saving.
TC Switches to timecode input mode.
STORE Switches to the mode for saving an
effect timeline/snapshot/shotbox/
macro.
In save mode, the [STORE] button
is l
it amber.
RCALL Switches to the mode for recalling
an effect timeline/snapshot/
shotbox/macro.
In recall mode, the [RCALL] button
is l
it amber.
Button name Description
0 to 9 Enters numeric values.
. (period) • Enters a decimal point.
• In timecode input mode, “00” is
e
ntered.
• In effect timeline operation mode
a
nd snapshot operation mode,
use to search for an empty
register.
Function name Button name Description
+/–
EFF DISS
• Inverts the + (plus) and
– (minus) signs.
• In effect timeline operation mode
an
d snapshot operation mode,
use to add the effect dissolve
attribute.
CLR
AUTO TRANS
• Deletes the entered numeric
value.
• In snapshot operation mode,
use to add
the auto transition
attribute.
TRIM
GPI ENBL
Use when entering difference
val
ues.
Enter a numeric value and press
the [TRIM] button to increase/
decrease a setting value.
ENTER • Confirms the entered numeric
value.
• For a register number, executes
a regi
ster recall/save.
Note
Button name Description