Sony XVS-G1

49
Transition type selection buttons
Wipe direction selection buttons
Transition preview buttons
Pattern limit setting buttons
Main/sub switching buttons (multi program 2
mode)
c Di
splay
The display shows the follow
ing information.
• Left-side display:
Target switcher bank name (M/E1 to M/E5, P/P)
Main and sub assignment status when in multi program
2 mo
de (MAIN, SUB, MAIN&SUB)
• Right-side display:
Transition rate
During key priority setting operation, the display shows
the following
information.
• Left-side display:
State (displayed highlighted when on) and priority of
k
ey 1 to key 4
Main and sub assignment status when in multi program
2 mo
de (M, S)
• Right-side display:
State (displayed highlighted when on) and priority of
k
ey 5 to key 8
Main and sub assignment status when in multi program
2 mo
de (M, S)
d In
dependent key transition execution section
(assignable buttons)
You can assign execution buttons for independent key
t
ransitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assign
ing buttons, see “Assigning
Control Panel Buttons” (page 397).
Function
name
Button name Description
Mix MIX Selects mix.
NAM NAM Selects NAM (non-
additive mix).
Super Mix SUPER MIX Selects super mix.
Preset Color
Mix
PST COLOR
MIX
Selects preset color mix.
Wipe WIPE Selects wipe.
DME Wipe DME WIPE Selects DME wipe.
FM 1&2 Clip to
FM 15
&16 Clip
FM1&2 CLIP
to FM15&16
CLIP
Selects clip transition.
Function
name
Button name Description
Normal NORM The wipe proceeds in the
di
rection from black to
white of the pattern
images, shown in “Wipe
Pattern List” (page 456),
or in the direction of the
arrows (norm
al).
Normal/
Reverse
NORM/REV The wipe direction
al
ternates between
normal and reverse after
each transition.
Reverse REV The wipe proceeds in the
op
posite direction of
normal (reverse).
Function
name
Button name Description
Transition
Preview
TRANS PVW Switches the transition
pre
view mode.
You can check a transition
using preview output.
Function
name
Button name Description
Limit Set LIMIT SET Sets the pattern limit.
Pattern Limit PTN LIMIT Enables the pattern limit.
Function
name
Button name Description
Main MAIN Switches operation to the
function on the main side
in multi program 2 mode.
Simultaneously pressing
the
[SUB] button activates
both the main and sub
operations.
Sub SUB Switches operation to the
function on the sub side in
multi program 2 mode.
Function
name
Button name Description
Key 1
Transition to
Key 8
Transition
KEY1 TRANS
to KEY8
TRANS
Inserts or removes a key
automatically with the set
transition rate and
transition type.
During the transition, the
button is lit amber.
Key 1 On to
Key 8 On
KEY1 ON to
KEY8 ON
Inserts or removes a key
instantaneously.
If a key is currently
inse
rted, the button is lit
amber.