Sony XVS-G1

59
n GPI 1 and 2 connectors (D-sub 25-pin)
Can be used when an XKS-G1700 Legacy Int
erface
Board (option) is installed.
Used as a GPI input port and GPI output port.
Can also be used as a tally input/output port.
o N
etwork expansion 4 connector
p N
etwork expansion 3 connector
q N
etwork expansion 2 connector
r N
etwork expansion 1 connector
PCIe slot. Supports third-party ne
twork expansion cards.
Used as interface expansion 1 to 4 LAN connectors.
For details, see “Setting the Network Interface”
(page 447).
s REMOTE
1/2, 3/4, 5/6, 7/8 connectors (RJ-45,
RS-422 compliant)
Can be used when an XKS-G1700 Legacy Int
erface
Board (option) is installed.
Connect to a device that supports VTR (Sony 9-pin VTR
pro
tocol), disk recorder (Video Disk Communications
Protocol, Odetics protocol), or P-Bus (Peripheral Bus II
protocol) protocols.
Can also be used as a tally output port.