1 Introduction
2 SOREDEX
206718 rev 9
1.2 Intended use
The unit is intended for dental radiographic examination of
teeth, jaw and TMJ areas by producing conventional 2D x-
ray images as well as x-ray projection images of an
examined volume for the reconstruction of a 3D view.
The unit is also intended for carpus imaging in assisting
cephalometric analyses (Not in USA).
CAUTION! USA only: Federal law restricts this device to
sale by or on the order of a dentist or other qualified
professional.
1.3 Intended user profile
Only for professionally qualified dental / medical personnel.
Typical user is a dental assistant with specific training for
using dental x-ray units.
1.4 Associated documentation
• CRANEX 3D user manual
• CRANEX 3D installation manual
• SCANORA software user manual
• SCANORA software installation manual
• The user manual supplied with the 3D imaging
software
• The installation manual supplied with the 3D
imaging software
1.5 References
The following instructions are delivered with in the
CRANEX 3D installation manual:
• Firmware update instructions
• Calibration instructions
• Cephalostat upgrade instructions
• Cephalostat side changing instructions
• 3D upgrade instructions are delivered with the 3D
upgrade kit.
To Next Page