206718 rev 9
SOREDEX 115
10 PC requirements
10.1 Minimum PC requirements
Minimum PC requirements for 3D acquisition workstation
Processor 2.5 GHz dual core, or better
Memory 8 Gigabytes RAM, or more
Hard disk 500 GB, or more
Expansion slot PCI-Express bus for supplied GPU,
full length
Power supply 500 watt minimum
Network Gigabit Ethernet 1000Base-T
Operating system Windows 7, Windows 8 / 8.1 or Windows 10 (64-bit)
Display 20" LCD display, 1600 x 1200 or
22" LCD wide-screen display,
1680 x 1050, or better
Standard The PC must meet the IEC 60950 standard (minimum re-
quirements)
Graphics board The system is highly dependent on the used graphics
board and graphics driver of the reconstruction worksta-
tion. Consult technical support for information on the sup-
ported boards and drivers. Examples of supported
boards:
NVidia Quadro 4000
NVidia GeForce GTX 660
The compatible graphics driver versions are found on the
driver update DVD.
2 GB dedicated display memory is required.
PCI board connection Full-length PCIe x16 slot
(for GPU board)
USB USB ports (for HASP Dongle keys)
• 1 for reconstruction system
• 1 for 3D viewing SW (if needed)
Mouse Mouse with scroll wheel
To Next Page
Loading...