5 Using the unit
42 SOREDEX
206718 rev 9
NOTICE! Protrude (angled outward) – focal trough light
should be around in the third or four tooth. Pretrude (an-
gled inward), -focal trough light should be around in the
first or second tooth.
If the patient is edentulous the focal trough light should
be approximately 5mm behind the lip holder when the
focal trough position is 0 mm.
NOTICE! If the focal trough light is not positioned as de-
scribed above, press the focal trough adjustment key(s)
to move the focal trough light until it is positioned cor-
rectly.
9. If AES is enabled (green light lit around "A"), press the
Return button and wait for the movement to finish. Verify
that the suggested exposure values are suitable for the
patient. If AES is disabled, set the exposure values man-
ually and press Return after patient positioning is done
and temple supports are closed.
To Next Page
Loading...