7-1Lasair® Pro Aerosol Particle Counter Operations Manual
Alarm limits can be set for all available particle and environmental channels. One
particle alarm may be set for each particle size channel—and each particle alarm may be
individually enabled or disabled.
Use the following tabs to configure alarm settings:
• GENERAL Tab on page 7-2
• PARTICLES Tab on page 7-3
• ENVIRONMENTAL Tab on page 7-5
• TREND Tab on page 7-6
• REASONS Tab on page 7-8
Navigation
Press and then (ALARMS). You should now see the GENERAL tab.
Chapter 7
Alarms
To Next Page
