12-15Lasair® Pro Aerosol Particle Counter Operations Manual
Chapter 12 : System Configuration
NOTE: Changing between Pharmaceuticals mode and All channels mode is
confirmed by pressing . This will cause the Lasair Pro to reboot and
reconfigure itself. All existing data is deleted.
Buttons
Image Name Description
Dropdown
Available
Press to open the dropdown menu for either the
Mode or channel size.
Micrometer
Units
Select for all channel size units to be in m.
Nanometer
Units
Select for all channel size units to be in nm.
Restore Factory
Default
When pressed, all channel changes made from
factory defaults will be undone.
Return to
Previous Saved
Settings
When pressed, all channel changes made since
starting the Lasair Pro will be undone.
Delete All
Channel
Settings
Deletes size settings for each channel.
Undo Most
Recent Change
Reverts display to the last channel size setting.
Can be pressed to undo the Delete All Channel
Settings option.
Save Saves current channel configuration.
Table 12-3. CHANNELS tab, SYSTEM
To Next Page
