11-9Lasair® Pro Aerosol Particle Counter Operations Manual
Chapter 11 : Statistics
SETUP Tab
Figure 11-8. SETUP tab, STATISTICS
Configuration Settings
The following table describes the settings the users can configure before enabling
Statistics Mode. Once Statistics Mode is enabled, settings cannot be changed until the
Statistics plan has been terminated.
Image Name Description
Area
Sets the area of the room to be
certified in m or . You cannot
change this parameter once
Statistics Mode is enabled.
m
2
Sets the Area units in squared
meters. Units cannot be
changed once Statistics Mode is
enabled.
Table 11-1. SETUP tab, STATISTICS
To Next Page
