Chapter 11 : Statistics
11-10 Lasair® Pro Aerosol Particle Counter Operations Manual
Image Name Description
2
Sets the Area units in squared
feet. Units cannot be changed
once Statistics Mode is enabled.
SETTINGS
Number of
Locations
Sets the minimum number of
the locations to be sampled.
The number is automatically
calculated to comply with the
selected standard based on the
Area setting. The number can
be increased but not decreased.
Number of
Samples
Sets the number of samples to
be taken at each location.
Sample
Volume
Sets the minimum sample
volume collected at each
location.
DELAYS
Purge
Initial delay before the start of
sampling.
Intersample
Delay between samples if
Number of samples is greater
than one.
Table 11-1. SETUP tab, STATISTICS
To Next Page
