Spectris PARTICLE MEASURING SYSTEMS Lasair Pro 310 - Data Displays

11-3Lasair® Pro Aerosol Particle Counter Operations Manual
Chapter 11 : Statistics
Data Displays
A
B
C
D
Figure 11-3. Swipe le to switch between displays
In Statistics Mode, the following data displays are available on the HOME screen:
• A. Cumulative particle count display: For each channel size, the table displays
the particle count limit to meet the standard, and the cumulative particle count for
the current volume sampled at the location.
• B. Maximum and Average counts display: For each channel size, the table
displays the maximum and average cumulative particle count recorded for all
locations.
• C. Completed sampling data by location: Displays all completed sampling
data for each location and each particle size, including those not enabled for the
statistics plan. Scrollbars on the right side and bottom of the table allow the entire
table to be shown.
• D. Environmental (analog) input channel display: Not aected by Statistics
Mode. See Environmental (Analog) Input on page 4-6 for more information.