Chapter 10 : Display, Data and Reports
10-12 Lasair® Pro Aerosol Particle Counter Operations Manual
Line No. Displayed Text Description
1
Final Sample
Report
Title of Report. Possible values:
• Final: Report printed aer the sampling
completed.
• Partial: Report printed during the sampling
process.
2 Heading 1
Heading 1 text specified in the REPORTS tab of the
DISPLAY screen. Not shown if the field is blank.
3 Heading 2
Heading 2 text specified in the REPORTS tab of the
DISPLAY screen. Not shown if the field is le blank.
4 Instrument ID
Name/ID of the Lasair Pro particle counter that
produced the data.
5 Serial Number
Serial number of the Lasair Pro particle counter that
produced the data.
6 Calibrated
Date on which the Lasair Pro particle counter was
last calibrated.
7 Batch ID
Batch ID text specified in the REPORTS tab of the
DISPLAY screen. Not shown if Batch ID field is blank.
8 Operator
Operator text specified in the REPORTS tab of the
DISPLAY screen or the current logged user if security
is enabled.
See Chapter 6 for security configuration.
9 Area
Area where the sampling was performed. Labeled as
“Unassigned” if no areas are defined.
See Chapter 8 for area configuration.
10 Room
Room where the sampling was performed. Labeled
as “Unassigned” if no rooms are defined.
See Chapter 8 for area configuration.
11 Location
Location where the sampling was performed.
Labeled as “Unassigned” if no locations are defined.
See Chapter 8 for location configuration.
12 Recipe
Name of the recipe used, if any.
See Chapter 9 for recipe configuration.
Table 10-4. Final Sample Report legend
To Next Page
