11-19Lasair® Pro Aerosol Particle Counter Operations Manual
Chapter 11 : Statistics
Line No. Displayed Text Description
3 Heading Two
Heading 2 text specified in the REPORTS tab of the
DISPLAY screen. Not shown if Heading One field is
blank.
4 Instrument ID
Name/ID of the particle counter that produced the
data.
5 Serial Number
Serial number of the particle counter that produced
the data.
6 Calibrated Date on which the particle counter was last calibrated.
7 Batch ID
Batch ID text specified in the REPORTS tab of the
DISPLAY screen. Not shown if Heading One field is
blank.
8 Operator
Operator text specified in the REPORTS tab of the
DISPLAY screen. Not shown if Heading One field is
blank.
9 Area
Area where the sampling was performed. See Chapter
8 for area configuration.
10 Room
Room where the sampling was performed. See
Chapter 8 for area configuration.
11 Location
Location where the sampling was performed. See
Chapter 8 for location configuration.
12 Recipe
Name of the recipe used, if any. See Chapter 9 for
recipe configuration.
13
Started:
04/01/2020
09:00:00
Date stamp (day / month / year) followed by a time
stamp (hour : minute : second) when the statistics
sample was started.
14
Finished:
04/01/2020
09:30:35
Date stamp (day / month / year) followed by a time
stamp (hour : minute : second) when the sample
ended.
15
Certification
Standard
The certification standard chosen.
Possible values:
• ISO 14644-1
• EU GMP Annex 1
• FS-209E
• Average
Table 11-2. Statistics Printout legend
To Next Page
