Starlite MK5 - Starlite Mk5 Description and Features; Movement, Gobos, and Colour Systems; Beam Effects, Shutter, Dimmer, and Frost; Light Source, Power, and Construction

STARLITE Mk5 User Manual Version 1.2
11
Starlite MK5 Description and features
Movement
360º Pan / 270º Tilt, DC Drive Motors for Ultra-smooth movement
Pan / Tilt Feedback Sensors for accurate positioning and position repeatability
Gobos
2 x 6 position rotating gobo wheels with vari-speed rotation (both directions) and indexing
Suitable for interchangeable Glass, Metal or Dichroic Colour gobos
Takes T size gobos (46.5mm OD, 38mm Dia. image size) or,
44mm OD (with adapter ring, Part No. 0385)
Using both gobo wheels and the remote focus facility it is possible to “Morph” between gobos
Colour
Cyan, Magenta, Yellow Subtractive Colour mixing system allowing infinite colour selection
with smooth x-fades or “snap” colour changes
6 position Colour wheel with interchangeable Dichroic filters (46.5mm OD)
2 Colour Temperature Correction, Red, Green and Blue Filters already installed.
Vari-speed wheel allowing scrolling, continuous scrolling or “bump” colour changes
Beam Effects
Multi-beam rotating 5 Facet Prism with vari-speed rotation (both directions)
(Additional effects available)
Shutter
Fast, silent Shutter with variable speed (1 fps -7 fps) Strobing facility
Dimmer
Separate full range (0-100%) Dimmer allowing fast/slow smooth dimming
Focus
Remote Motorised Focus adjustment using high optical quality triplet lens
Triplet Lens is interchangeable to allow different beam angles
(In development)
Diffusion
Sharp-edged beam to Wash beam variable Frost mechanism
Iris
Pin-spot to Full-beam smooth running motorised Iris for varying beam angles
Light Source
575 or 1200 W/GS HMI Lamp wattage options, Daylight (6000ºK) Colour Temperature
750 hrs rated lamp life
Lamp Power Supply
Magnetic ballast or Electronic ballast options (Power factor corrected) for both lamp options.
Optical Output
Custom designed optical path, utilising coated optics, cold-mirrored reflector
and Triplet projection lens.
Lamp Cooling
Finned lamp housing is custom designed to minimise the amount of forced air-cooling required
thereby reducing the associated fan noise.
Control Protocol
DMX512 (USITT 1990) with a user definable channel configuration.
Default factory set channel configuration uses a maximum of 19 channels.
Mechanical Construction
Modular design allows for module swapping, upgrading, easy servicing and cleaning.
Easy internal access and fast Lamp change (thru safety interlocked door)
Four carrying handles and multiple hanging points
Rugged construction and durable exterior epoxy paint finish