STONEX R25LR - 4 Basic Functions; Display

Stonex R25/R25LR Total Station - User Manual 18
4. Basic functions
4.1. Display
R25 series is equipped with two large LCD screens (240×128dots). The LCD could display 8 lines with 24 characters
per line.
NOTE: Do not touch the screen with sharp things.
Once you switch on the instrument, the measure mode is shown on the display directly. As alternative, it is possible
to set another page (such as the electronic bubble display) at every start, see 5.6. Start-up sequence for more
information.
Status screen
Symbols:
Function
Symbol
Description
Current power
Level of the remaining battery
Compensator mode
The compensator is on
The compensator is off
Target type
Distance measurements with prism
Long range distance measurements with prism
Distance measurements with sheet
Distance measurements with no prism
Compensator mode
Page
Current power
Target type
Storage media type
Telescope position
Bluetooth mode