Stonex R25/R25LR Total Station - User Manual 14
3.3. Setting up the instrument
Set up the tripod first: extend the extension legs to suitable lengths and
tighten the screws on the midsections. Make sure the legs are spaced at
equal intervals and the head is approximately level. Set the tripod so that the
head is positioned over the surveying point. Make sure the tripod shoes are
firmly fixed in the ground.
Mount the instrument on the tripod head. Supporting it with one hand,
tighten the centering screw on the bottom of the unit to make sure it is
secured to the tripod.
3.4. Centering and levelling-up
Basic levelling-up with the circular level
Move the foot screws A and B in opposite direction till the circular
bubble is perpendicular to a line shaped with screw A and B. The
direction of rotation in left thumb indicates the movement of the
circular bubble.
To Next Page
Loading...
