STONEX R25LR - 6 Measurement; Angle Measurement

Stonex R25/R25LR Total Station - User Manual 43
6. Measurement
6.1. Angle measurement
6.1.1. Measure a horizontal angle of two points
Sight the 1st target.
Press F4[ ↓ ] twice and F3[HSET].
Use the F3[SHIFT=0] key to set the 1st target as 0° in the measure
mode.
Confirm pressing F4[Yes]
Sight the 2nd target. The displayed Hz value is the included angle
between two points.
2nd target
1st target