STONEX R25LR - About Battery

Stonex R25/R25LR Total Station - User Manual 12
3.2. About battery
3.2.1. Battery power symbol
NOTE:
• The working time of battery will be affected by many factors, such as ambient temperature, recharging
time, recharging and discharging times. On the data safe side, we suggest the users recharge the
battery full or prepare several full batteries before operation.
• The battery symbol only indicates power capability for current measurement mode. The power
consumption in distance measurement mode is more than in angle mode, if the instrument enters the
distance measurement mode from angle mode, the power maybe auto-off because of lower battery.
• The symbol only indicates the supply power but not the instantaneous power change. And if the
measurement mode changes, the symbol will not show the power’s decrease or increase immediately.
• It is suggested to check every battery power before field work.
Measurement is impossible, it is necessary to replace or recharge battery
The battery is lower, it is better to replace or recharge it
Measurement is possible