STONEX R25LR - Page 68

Stonex R25/R25LR Total Station - User Manual 66
Gradient: Grade [%] between point1 and point2.
dSD: Slope distance between point1 and point2
dHD: Horizontal distance between point1 and point2
dVD: Height difference between point1 and point2.
HzCor: Azimuth between point1 and point2
The softkeys at the bottom of the results page are the following:
• In polygonal method:
o [NewTie]: an additional missing line will be computed. Program starts again from the first target
point;
o [NEWP]: point 2 is set as starting point of a new missing line. Program starts from the second
target point;
o [RADIAL]: switch to radial method.
• In radial method:
o [CentPt]: determine new central point;
o [RadPt]: determine new radial point;
o [POLY]: switch to polygonal method.