Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. B
Appendix A - Troubleshooting
Troubleshooting Real-Time Ring
1. Typically a switch will be protected by either Real-Time Ring or RSTP. If Real-Time
Ring is configured on a switch, disable RSTP.
•
On the Redundancy Settings – Spanning Tree Settings page, set Redundancy protocol to “None”
2. It is possible for Real-Time Ring and RSTP to coexist on a switch. If a switch participates
in both a Real-Time Ring and a spanning tree, exclude the Real-Time Ring ports from
spanning tree:
A-4
To Next Page
Loading...