Technical Specifications (cont’d)
Technical Specifications continued on the next page.
Copper RJ45 Ports: (10/100 Mbps or 10/100/1000 Mbps)
Copper Ports
Shielded RJ45
Speed
10/100 Mbps or 10/100/1000 Mbps (depending on model)
Protocols supported
All standard IEEE 802.3
Auto-crossover
Yes, allows you to use straight-through or crossover wired cables
Auto-sensing operation
Yes, Full and half duplex
Auto-negotiating
Yes, 10BaseT and 100BaseT
Auto-polarity
Yes, on the TD and RD pair
Flow control
Automatic
Ethernet isolation
1500 VRMS 1 minute
Plug and play
Yes
Cable requirements
Twisted pair (Cat. 5 or better) (shielded recommended)
Max. cable distance
100 meters (328 ft)
1-32
Chapter 1 - Hardware
Stride Industrial Ethernet Switches User Manual 2nd Ed. Rev. B
To Next Page
Loading...