Stryker Performance-PRO XT User Manual

www.stryker.com 6086-009-001 REV B 29
Return To Table of Contents
Operation Guide
LOADING OR UNLOADING THE COT
The cot loading and unloading instructions on page 30 through page 33 are intended for cots that you will NOT use
with Power-LOAD. For Model 6086 cots with the Power-LOAD option, see the Power-LOAD Operations/Maintenance
Manual for loading and unloading instructions.
LOADING OR UNLOADING THE COT WITH THE POWER-LOAD OPTION
The Model 6086 Performance-PRO™ XT cot is fully compatible with the Model 6390 Power-LOAD system if it is
ordered with the Power-LOAD option or compatibility kit.
For more information about using your Power-LOAD compatible cot, see the Power-LOAD Operations/Maintenance
Manual.
WARNING
• Power-LOAD is designed to be compatible with the 6085/6086 Performance-PRO XT, 6500/6506 Power-PRO XT,
and 6510/6516 Power-PRO IT cots with the Power-LOAD option only. In certain situations, you can use Power-
LOAD as a standard antler for most X-frame cots, but a rail clamp assembly is required for all cots without the
Power-LOAD option.
• It is the responsibility of the cot operator to ensure that the cot being used in the Stryker Model 6390 Power-LOAD
system is a Power-LOAD compatible cot. Injury may result if a non-compatible cot is used in the Stryker Model
6390 Power-LOAD system.

Stryker Performance-PRO XT Specifications

General

Brand	Stryker
Model	Performance-PRO XT
Category	Medical Equipment
Language	English