8 6086-009-001 REV B www.stryker.com
Return To Table of Contents
This manual is designed to assist you with the operation and maintenance of the Stryker Performance-PRO™ XT cot.
Read this manual thoroughly before using the equipment or beginning maintenance on it. To ensure safe operation of
this equipment, it is recommended that methods and procedures be established for educating and training staff on the
safe operation of this cot.
PRODUCT DESCRIPTION
The Stryker Model 6086 Performance-PRO™ XT is a manual ambulance cot that consists of a platform mounted on
a wheeled X-frame designed to support and transport a maximum weight of 700 pounds in pre-hospital and hospital
environments. The device is collapsible for use in emergency vehicles and has an adjustable load height feature to
allow the device to be set to different ambulance deck heights for proper body mechanics during loading and unload-
ing. Duplicate foot-end controls on the upper and lower lift bars accommodate different operator positions or sizes and
the side release handle allows a single operator to raise and lower an unoccupied cot. The device is equipped with
the following: a retractable head section for 360-degree mobility in any height position, side rails, patient securement
straps, an adjustable pneumatic backrest and various optional accessories that assist with transport of the patient.
Maximum patient comfort is attainable with the three different litter positions of shock, flat leg and optional knee gatch
positioning.
INTENDED USE OF PRODUCT
The Stryker Model 6086 Performance-PRO™ XT is a non-powered wheeled stretcher, which is intended to support and
transport the entire body of a traumatized, ambulatory or non-ambulatory human patient (includes infants and adults).
The device is designed to support patients in a supine (horizontal) or sitting position and facilitate the transportation
of associated medical equipment (i.e. oxygen bottles, monitors, and/or pumps) in emergency/transport vehicles. This
ambulance cot is intended to be used in pre-hospital and hospital environments, in emergency and non-emergency
applications. It is rated to a maximum capacity of 700 pounds (sum of the patient, mattress and accessory weight) and
the intended operators of the device are trained professionals including: emergency medical service and medical care
center personnel, as well as medical first responders. The expected service life of the product is 7 years.
Ambulance cots are intended for transportation purposes. They are not intended for extended stay or to be used
as hospital beds. They are also not intended to be used in devices which modify air pressure, such as hyperbaric
chambers.
Introduction
To Next Page
Loading...
Need help?
General
