Studer NEXT3 - Page 102

Studer Innotec SA
next3
102 V 1.3 © Studer-Innotec SA next3 Tech manual
• Battery Cycle: Parameters defining the charging profile when it is not a communicating
battery
• Battery Protection: Parameters that defines how the battery is protected: for example, when
to stop the inverter.
The battery cycle settings are useful and shown only for non-communicating batteries.
SOC for Backup
SOC for grid feeding
The grid is used to
recharge the battery to
this level to guarantee a
minimal energy backup
Only solar excess is
used to recharge the
battery. That storage will
buffer is used to supply
the load
All the power is sent
back to the grid (if
possible) above this
level